If there are two instances of the image field, the second instance indicates a second system image present on the card. To display the current system time, enter the show clock command in User Exec mode or Privileged Exec mode. ip domain-list domain-name [ use-vrf name ], no ip domain-list domain-name [ use-vrf name ]. The value appears as noStateChange, sleeping, polling, disabled, portConfigurationTraining, linkup, or linkErrorRecovery. dst-lid 857, show ib-agent channel-adapter 00:05:ad:00:00:00:13:17 node-info, show ib-agent switch 00:05:ad:00:00:00:13:7f linear-frd-info lid 2, show ib-agent switch 00:05:ad:00:00:00:13:7f mcast-info lid all, show ib-agent switch 00:05:ad:00:00:00:13:7f port-info, show ib-agent switch 00:05:ad:00:00:00:13:7f sl-vl-map, SFS-270# show interface ib 4/7 statistics, fc srp itl command on page9, fc srp-global itl command on page19. Chassis slot that contains the gateway that you want to display. The value of the LMC specifies the number of path bits in the LID. 16-bit base LID of the master subnet manager that manages this port. Number of partitions that the node supports. The following example traces application 9, module 1, card 2. Fibre Channel gateway port number, in slot#/port# format. (Optional) Displays traffic statistics for the port(s) that you specify. The VirtualHost feature in Apache was introduced in 1996. Initial value of the lease-period timer, in seconds. Use the ip domain-lookup command to enable DNS. Chassis temperature should be monitored to verify the cooling efficiency of the blowers and your data center air-conditioning. (Optional) GUID of the controller that you want to view. Disk space may be an issue if you try to update the system image on the controller but cannot propagate this data to the interface card because the interface card has no free space. Displays attributes of backup IP addresses on the card. The maximum high-limit matches the vl-arb-high-cap on the other side of the link and then negotiating downward. (Optional) Specifies the virtual routing and forwarding (VRF) instance. Maximum range of data virtual lanes supported by this port. domain-name Table6-11 lists and describes the fields in the show diagnostic power-supply command. show card-inventory [card-selection | all]. Number of sequentially dropped packets at which the port enters a VLStalled state. Navigator to find information about platform support and Cisco software image Speed of an active link. This determines that electricity flows between nodes and they can perform a handshake. A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. Defaults to the chassis slot and internal device name used by the chassis OS to communicate with the device. Table6-16 lists and describes the fields in the show diagnostic post command. GUID extension of the physical initiator. The following example displays the temperature sensor information on the Server Switch. Table6-67 lists and describes the fields in the show interface ib command output. Temperatures are in degrees Celsius and vary depending upon their location. Printed Circuit Assembly (PCA) assembly number. Displays true if the bridge group belongs to a multicast group. When you add the SM manually, the priority defaults to 10. [source-interface interface-type interface-number]. Use the ip domain-list command to configure additional domain names for the device. release notes for your platform and software release. Syntax Router (config)#ip domain-lookup Reasons to discard a datagram include the following: Cumulative number of input datagrams that ports discarded because the IP address in the destination field of the header of the datagram was not a valid address to be received by the port. To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The following example displays the location information that you configured with the location command. show ib sm service [subnet-prefix {prefix | all} [p_key pkey | service-gid GID | service-id ID]] [summary]. GUID extension of the initiator in the initiator-target pair. For the Cisco SFS 3012, you may only access the Serial Console port on the currently active controller card. For any interface that does not support protocol multiplexing, this counter is always 0. 1, Release 1.1, for more information. The following example displays all of the services on all of the IOCs in the fabric (output abridged). The following example displays the GUIDs that connect to your Server Switch and the GUIDs within your Server Switch. The value is enabled or disabled. Subnet prefix of the subnet manager that you want to view. The subnet manager dynamically configures all multicast groups. Name of the service to associate with the target. The "admin type" identifier "controller" indicates the type of independent controller card found on both sides of the system chassis. primary Dynamically-assigned or administratively-assigned description of the target. This command has no arguments or keywords. See the MulticastForwardingTable section of the Subnet Management chaper of the IB spec for details. This command displays the ports within Server Switches through which traffic travels from a source LID to a destination LID. Statistical data is comprised of transmission errors, requests, discards, packet fragments, etc. Use this command to display the network domain of the chassis and the DNS servers that your Server Switch uses to resolve network names to IP addresses. Number of the link port that received this SNMP request. Table6-6 describes the fields in the show bridge-group command output. The following example displays traffic statistics for the internal gateway port. To display the Cisco Discovery Protocol (CDP) information for a specific neighbor, enter the show cdp entrycommand in User Exec mode or Privileged Exec mode. This parameter indicates the state of the low-level hardware link negotiation. A transition identifies a port change from down to initialize, initialize to down, armed to down, or active to down as a result of link state machine logic. server ip domain-name domain-name [ use-vrf name ], no ip domain-name domain-name [ use-vrf name ]. The SNMP identifier is useful if you are running your own SNMP software. The slot number is from 1 to 255 and the port number is from 1 to 128. Temperature at which the sensor shuts down the Server Switch. 1, Release 1.1, for more information. The following example displays the completed and ongoing diagnostic tests on all power supplies. Operational status of the sensor ("up" or "down"). Use the vrf context command to enter the VRF context mode to configure the domain names for a particular VRF. Cumulative number of incoming packets destined for a single port. Internal gateway port that you want to view. However, since. Specifies the domain name for the IP domain list. spoofing WWPN of the target port on the FC storage device. Specifies the subnet prefix of the counters to view. 00:05:ad:00:00:00:13:81, show ib sm switch subnet-prefix fe:80:00:00:00:00:00:00 summary, show ib sm switch-elem-route subnet-prefix fe:80:00:00:00:00:00:00 src-lid 858 Use this command to verify that all of the ports in your fabric came up when the SM initialized them. ip name-server ip-address [ use-vrf name ], no ip name-server ip-address [ use-vrf name ]. (Optional) Displays the port counter configuration. Maximum high-priority limit on the number of bytes allowed for transmitting high-priority packets when both ends of a link operate with multiple data virtual-lanes. Highest arbitration value allowed by the arbiter in determining the next packet in a set of packets to send across the link. This counter does not increment when the interface is operating in full-duplex mode. Subclass of the I/O class protocol of the IOC. Table6-41 show ib sm service Command Field Descriptions. Duration matches (4.096 ms * 2^SubnetTimeout). Fan or fans whose tests you want to view. show bridge-forwarding [integer] [subnet subnet-prefix prefix-length]. Displays "active" or "inactive" to indicate that the card actively services IP packets addressed to the IP address in the "address" field or does not service packets to the specified address. Speed of an active link. Cumulative number of datagrams that the port successfully received but discarded due to an unknown or unsupported protocol. Learn more about how Cisco is using Inclusive Language. The following sections summarize DNS concepts and function. Number of times the login logged in since the Server Switch booted. [ip-address]. In test-mode, the FC gateway persistently logs into storage and blocks the initiators. To clear a static IP address, use the no form of this command. Supported base management datagram version supported. To delete a domain name, use the no form of the command. 1, Release 1.1. Use this command to display the configuration of all the nodes on a subnet, or to display the configuration of an individual node. Supported link width. All users that dial in during the five minute TTL time will land on one host, the first IP address in the list. Most people disable this command as it can be a frequent annoyance to those who mistype words on a regular basis. The following example shows the summary configuration of a subnet manager. Total number of SRP commands outstanding on the Fibre Channel interface gateway(s). (Optional) Subnet prefix of the subnet managers that you want to display. Device ID information, as assigned by the device manufacturer. Cumulative number of IP datagram fragments that the port has generated. If this feature does not apply to the storage, no output appears. Each name can map to one or more IP addresses. show ib pm connection counter subnet-prefix prefix src-lid source dst-lid destination. Version of InfiniBand firmware on the card. The value is vl0, vl0ToVl1, vl0ToVl3, vl0ToVl7, or vl0ToVl14. 1, Release 1.1, for more information. To display the status and address information for the virtual InfiniBand Management port, enter the show interface mgmt-ib command in User Exec mode or Privileged Exec mode. To find information about See section 4.1.3, Local Identifiers, InfiniBand Architecture, Vol. This command configures the IPv6 address of the domain name server. All nodes that the subnet manager on your Server Switch actively manages qualify as subnet management nodes. Displays the field-replaceable unit (FRU) number of the card. To show the performance monitoring port monitor configuration, enter the show ib pm port monitor command in User Execute mode or Privileged Execute mode. To display the status of the power supplies on your Server Switch, enter the show power-supply command in User Exec mode or Privileged Exec mode. Displays "true" if you enable the feature and "false" if you disable the feature. Use this command to verify that the SRP configuration is locked or unlocked. Indicates if the switch enforces raw packets on transmitted packets. Number of subnet management packets that have been received on this port with invalid Q_Keys since initial power up or the last reset. The port identifier appears as zero (0) to indicate an internal port. The following example shows the login information of the current user. The following example shows the output of the show interface ib command without the sma or statistics keywords. ip dns source-interface { ethernet slot / port | loopback intf-num } [ vrf { vrf-name | default | management }], no ip dns source-interface { ethernet slot / port | loopback intf-num } [ vrf { vrf-name | default | management }]. Used with VLStallCount to determine the outgoing packets to discard. When the all keyword follows the show b-agent switch command, it displays statistics for all switches in the chassis. This counter also includes any datagrams that a Server Switch cannot route because all of the gateways on the Server Switch are down. Boolean value that indicates whether or not so support optional raw packet enforcement for the raw packets received by this port.
O Fortuna Time Signature, Cleanse Of Toxins Crossword Clue, Every Summer After Synopsis, Uncontested Divorce Fairfax Va, Madera Community College Counseling, Jewellers Glass Crossword,